Manufacturer / Model Grafotronic DCL2 550
Serial Number 220520G
Web Width 550 mm
Year of Manufacture
Location Germany
Condition Used – in production
CE Marking Yes
________________________________________
Main Configuration
Unwinder Module
• Max. roll Ø 1000 mm / weight 430 kg
• Ultrasonic sensor and web guide ±15 mm
• Splice table with clamps, servo brake, reel lift
Flexo Printing / Coating Module (10–24" repeat)
• GEW E2C UV dryer
• Ceramic anilox 400 l/cm – 5.5 cm³/m²
• Stainless ink pan 1.2 L, reverse-angle doctor blade
• Re-register drive for overprinting
• Max. speed 100 m/min – tolerance ±0.1 mm
Die-Cutting Module (10–24" repeat)
• Servo register system, anvil & support roller
• Contact matrix rewind, stripping bar
• Delam/Relam before die-cutting (limit 70 m/min)
• Max. speed 250 m/min, tolerance ±0.1 mm
Inspection & Slitting Section
• Missing Label Detection (MLD) up to 220 m/min
• Automatic Sci-Fi knife system (12 sets)
• Vacuum edge-trim removal
• Auto-set under/back scorer (2 knives)
Semi-Automatic Turret Rewinder
• 2 × Ø 600 mm rolls
• Semi-automatic cutting and push-out system
• Label & meter counters
• Core diameters 40–76 mm
Additional Equipment
• Anti-static brush
• Tablet with housing and accessories
• ERP interface
• Crane for magnetic cylinders
Materials
• Foil 30–250 µm
• Paper 100–250 µm
________________________________________