1. 3 pcs. 7G.030.310 F/03 new roller (No 7), Bottcher 0907313 with bearings size D=148mm length=1678mm without bearings if measured, length=1778mm with gears and bearings if measured.

2. 2 pcs. Inking transfer roller 121mm diameter dimensions written off from the roller - D=121mm length=1636mm without bearings if measured, length=1763mm with gears and bearings if measured. Also size 100mm is indicated, this could be the diameter of the shaft. The Botcher tag says 121/100/1636/1636/1763

This is most likely No 8 or No 9, because they are Ink transfer rollers with a diameter of 121mm, but they are not the same! No 8 (7G.609.251F), No 9 (7G.609.281F) do not have the Heidelberg number on top! Both are the same!

3. 1 pc. Dampening form roller new without bearings producer Botcher on the Botcher tag it says 144/125/1640/1640/1692



Used rollers 11 pcs.



1. 7G.030.370 F/02 Botcher 0907326, red inking roller, by number Red ink form/distributor is 7G.609.231F/01, but by code it could be No 6, Water form 7G.030.370F/02 144mm

2. 7G.009.241 F/12 Botcher 0907321 yellow inking roller, number for Yellow ink form/distributor 7G.609.241F/01 D=131mm. 7G.009.241 F/12 old code -> new code 7G.609.241F/01 009

3. 7G.009.271 F/09 Botcher 0907329 green inking roller diameter 118mm,

4. 7G.009.251 F/02 Botcher 0907323 No 8, I.Rol 7G.609.251F D=121mm

5. 7G.009.261 F/02 Botcher 0907325 ink ductor roller, No 5, Ink distributor 7G.609.261F/01 D=98mm

6. 7G.009.281 F/02 Botcher 0907322 No 9, I.Rol 7G.609.281F D=121mm

7. 7G.009.211 F/12 Botcher 0907318 No 10, White ink form/distributor 7G.609.211F/01 D=123mm

8. 7G.009.231 F/12 Botcher 0907320 No 2, Red ink form/distributor 7G.609.231F/01 D=106mm

9. 7G.009.221 F/12 roller with new bearings Botcher 0907319, No 3, Blue ink form/distributor 7G.609.221F/01 D=118mm

10. 7G.009.281 F/04 Botcher 0907322, No 9, I.Rol 7G.609.281F D=121mm

11. 7G.030.370 F/02 new roller Botcher 0907326 with bearings, Like new but a bend in the surface has been detected, therefore selling like a core. D=144mm