Hot melt gluing system with 4 guns

Double-sided tape applicator

COMBI UNICA basic machine:

Electro-pneumatic, internal glue flap closing

Side gussets plough folding

Three flaps plough folding

Lateral tabs pressing device

Tipper plate

Double register table left or right with vacuum belt

2 x folding buckle plate with fixed ribs

1 x folding buckle plate with movable ribs

Ready for use with the ESTRO unit

COMBI UNIT

Rising pile table

Maximum format: 760 x 1000  mm

Minimum format: 140 x 240  mm

Double rear air blower device, with one longer tube

Twin vacuum wheels horizontally adjustable

Front air separator over the width of format

Three paper transport devices “BRUCHI”, two with belt and one with larger wheels

Two-sheet trip device with thickness adjustment

Sheet gap controller device

Plough fold for 1 or 2 side tabs

Plough fold for side gussets device

Plough fold for a 3-flap device

Tabs pressing unit device two quick-release segmented rollers

Ready to use with the Estro Unit

Ready for hot melt/cold gluing system

Electro-pneumatic system for closing internal tabs, including:

2 x pneumatically operated ploughs

2 x electro valves with pressure adjustment

Photocell - Tipper plate

Movable and detachable plate

Electronic system governed by air blowers

Plate with movable ribs

Folding in plate – Maximum:  370 mm; Minimum: 40 mm

COPY COUNTER

Total counter

Hourly speed rate

Batch counting, including: stopping of feeding for a certain time, as the counting gets to the pre-selected batch

COMBI unit

Paper weight:120 - 400 g/sqm

Plough side folding:10 - 30 mm

Gussets plough side folding: 10 - 20 mm; 170 - 320 g/sqm

Three flaps folding: 40 - 100 mm; 170 - 350 g/sqm

Maximum speed:150 m/minute

Power requirement: 380/415 V  3 phase N E 50 Hz

Connected power:           8 kW

Compressed air requirement: 6 BAR

UNICA UNIT

Right register table with vacuum belt, after plough fold device

Left register table with vacuum belt, after the plough fold device

“BRUCO” with 5 wheels on the register table

Ready for hot melt/cold gluing system

Buckle plate unit for parallel folds

Noise protection hoods on the upper buckle plate unit

Folding head with 7 large diameter 60 mm folding rollers, fixed roller, in stainless steel, segmented

5 x Quick-release detachable rollers, in stainless steel, segmented

Exit quick-release launching roller

Automatic roller calliper settings

Possibility of 1 parallel fold, up to 400 grams with short grain direction

Possibility of 2 parallel folds, up to 350 grams with short grain direction

Folding buckle plate with movable ribs

2 x Folding buckle plates with fixed ribs

Folding in buckle plate: Maximum: 570 mm, Minimum: 65 mm

Small deflector

Large deflector

Large deflector exit

Ready for 5 x buckle plates

UNICA

Paper weight: 120 - 400 g/sqm

Maximum Format open : 760 x 1000 mm

Minimum format open : :140 x  240  mm.

Maximum format closed :700 x 500 mm

Minimum format closed : 120 x 70 mm

Maximum speed:             150 m/minute

HOT MELT gluing system

Electronic system to control glue application

Tank for the glue melting

Temperature controller

4 x Applicator guns

4 x Hoses /- 1,5 mt.

Encoder

Connected power 5,8 kw

MOHANDES

The Mohandes is a continuous top-loading friction feeder. It is height-adjustable and can be fitted into the COMBI unit. This feeder is useful when irregular shapes e.g. boxes or a second passage of the product is required. Also, when the run length is long, continuous running is more effective.

Independent, free-standing, continuous feeder

Top-loading facility

Autonomous electric plant

Height-adjustable and directional launch system

Maximum format: 600 x 800 mm

Minimum format: 120 x 150 mm

Load capacity: 200 mm

Double-sided tape applicator

Electro-pneumatic application tape system with controller

Tape width – maximum: 22 mm, minimum: 12 mm

Maximum working output: 100 pieces/minute

Production of simple folders, 3 flap folders, folders with gussets, presentation folders with document pockets, air ticket wallets, covers for music records, CD/DVD wallets with one or two pockets, CD/DVD and DI.GI. PACK wallets from 1 to 4 reinforced panels on request , floppy disk covers, paperback book covers with flaps, flexible book covers on request , photograph wallets with double flat pockets, with gussets and Combi type on request , currier envelopes DHL, Fed. Ex., etc. with double sided tape tear tape strip on request , medical file envelopes, special size envelopes, etc.

ESTRO unit can produce: presentation folders with capacity, envelopes with capacity, CD/DVD wallets with capacity on request , capacity wallets with curved or oblique pockets, capacity folders with capacity to one side and one flat pocket to the other, etc.