Machinery and Equipment
I. Web Offset Press Equipment
1994 Goss Magnum 21 x 35 Press Lines
• Two (2) four high Goss Magnum stacked units rated @35,000 IPH.
Featuring brush dampening, pneumatic
throw offs, console register, manual ink levers, MicroTrak cut-off controls
and WPC web break detection
systems.
• Two (2) Goss Magnum (C500) 21 inch cut-off folders with quarter fold
capabilities.
• Two (2) Butler 1000 Series Splicers with 50 diameter roll capacity and
3,600 hoist.
• Two (2) Butler constant tension infeeds with MicroTrak web guides.
• Two (2) ASI 12 ft. vertical dryers with upgraded Parker CTC controllers.
• Two (2) Jardis four (4) roll chill stands with Jardis web guides.
• Two (2) Jardis silicone applicators with automatic mixing station.
• Two (2) single web ribbon decks.
• Three (3) plow folding stations.
• Two (2) Spencer blowers.
1996 Goss Magnum 21 x 35 Press Lines
• Two (2) four high Goss Magnum stacked units rated @40,000 IPH.
Featuring brush dampening, pneumatic
throw offs, console register, Micro Trak cut-off controls and WPC web break
detection systems.
• Two (2) Goss Magnum (C500) folders with quarter fold capabilities, 21
cut-off.
• Two (2) Butler 1000 Series splicers with 50 diameter roll capacity and
3,000 hoist.
• Two (2) Butler constant tension infeeds with Micro Trak web guides.
• Two (2) TEC 12 ft. vertical dryers.
• Two (2) TEC systems three (3) roll chill stands with QTI web guides.
• Two (2) Quad Tech silicone applicators with automatic mixing station.
• Two (2) single web ribbon decks.
• Two (2) Graphic MicroSystem II remote inking consoles.
• Three (3) plow folding stations.
• Two (2) Spencer blowers.
• Masterflow automatic mixing and circulation tank.
II. Auxiliary Press Equipment
• Four (4) 150 NC Baldwin Stobb brick stackers.
• Four (4) RIMA RS-3610A compensating stackers.
• Five (5) Bunn string tyers.
• Two (2) Signode strapping machines.• Masterflow D2 multi-directional
inline stream separator.
• Masterflow D2H inline stream separator.
• Gammerler RS 111 four (4) knife trimmer with Dayton blower / shredder.
III. Miscellaneous Equipment
• Toyota 6000 LB clamp truck (Propane).
• Toyota 6000 LB forklift truck (Propane).
• Caterpillar 5000 LB forklift (Propane).
• Mitsubishi 5000 LB forklift (Propane).
• Crown floor jack (Electric).
• 5000 LB Arlyn floor scale.
• LanTech Q-Series semi-automated stretch wrapping system.
• Two (2) Carrier Aqua Snap four fan / three compressor chillers model
30RBB0764.
• Balemaster automatic baling system model B-425-6QU27.
• Quincy 75HP. 125 PSI air compressor model QMALACA3IE.
• Gardner Denver 75HP. 100 PSI air compressor model EBM99M03.
• Manchester 500 gallon / 165 PSI compressed air receiving tank.
• Atlas Copco FX-14 compressed air dryer.
• ZEKS 500 HDF compressed air filtration system.
• Two (2) Marathon down-stroke balers.
IV. Pre-Press
(2) Fully Automated CTP Lines
• Two (2) Screen Plate-Rite News 2000S image setters.
• Two (2) Nita Cyclone plate rotators.
• One (1) Nela automatic plate bender with built in punch.
• Three (3) Apple I-Mac workstations.
• TrueFlow fully automated workflow software.
• Oris Color Tuner color proofing system with Ink Saver.
• Epson Sure Color P7000 11 color 24 ink jet with onboard X-rite Spectro
Densitometer.
• Two (2) HP Design Jet 800 P.S. color plotters.
• Kyocera Ecosys D8060CDN color printer.
• Dell Dimension 8400 PC with job ticketing software.