Ideal for producing mid-size and big-size paper bags fast.
Paper bag machine series is applied to produce many types of paper bags with round handles, such as food paper bag, shopping bags and so on. This machine can produce paper bags of varying greatly sizes at a high speed, thus is especially suitable for being applied in food and clothing industries.

Features
• The Roll Shafts Types: The feeding roller is air shaft: easy to lock the paper roller by air.
• The Tension Control: The magnetic powder controller has fast response speed, high control accuracy, long life, and stable.
• The Hydraulic System: Hydraulic system for sheet roller changing, saving time, and more easy work.
• The Gluing: Automatic gluing system, adjust the volume of glue and location directly. With Energy-saving pressure rubber barrel, saving the cost.
• The Touch Screen: Touch screen easy for control.
• The Type of Lifting: Rolling inflatable shaft with Hydraulicautomatic feeding system: easy to change the paper roller.
• The Alignment: Correction system drive by servo motor: more precisely and stable. The side correction adopts ultrasonic sensor: stable the affected by light or dust.
• The Tube Forming: The paper tube forming adopts an integrated tube forming adjustment structure.
• The Driving Roller: Two driving roller, more power and stable, adopts Japan Yaskawa servo motor to control.
• The Cutting Station: High-speed uniform rotating cutter through a serrated knife or a flat knife, drive by Japan Yaskawa servo motor.
• The Color Mark: Senor to achieve the automatic color mark position adjustment, adopts Germany brand SICK.
• The Collecting Station: Automatic collect the finished paper bag on online line, and you can set the number of one line on the touch screen.
• The Automatic Lubrication System: Automatic lubrication system for the whole machine.
• The Bag Pressing Section: To make sure big size bag with good pressing and forming quality.
• The Gluing Box: The gluing holding bracket for adding the gluing, easier operate, don’t need clean the gluing box when stop the machine.

Technical Data
• Bag Width (W): 130-330 mm (without handle)
180-330 mm (with handle)
• Bag Width Bottom (H): 65-180 mm
• Bag Cutting Length (C): 260-530 mm
• Paper Roll Width: 420-1090 mm
• Max. Bag Speed: 130 pcs/min
• Paper Thickness: 60-150 g/m2 (without handle)
80-150 g/m2 (with handle)
• Paper Roll Inner Diameter: Dia 76 mm
• Paper Roll Diameter: Dia 1500 mm
• Handle Rope Height: 90-120 mm
• Handle Rope Diameter: Dia 3-5.5 mm
• Handle Sheet Length: 152 mm
• Handle Sheet Width: 42.5-50 mm
• Machine Supply: 380V, 50Hz, 3 phase, 4 wires
• Power: 30 KW
• Weight: 18500 KGS
• Dimension: L 13500 x W 5700 x H 2500 mm

Parameters
• Power: 3 Phases, 380V ±10%, 50 Hz
• Compressed Air: Pressure: 0.6 MPa
Oil and Humidity: ? 8 mg/m3
• Installation Height: Max. altitude: 1500 m
• Ambient Requirement: Relative Moisture: Max. 65% when 40 °C
Temperature Range: 10~40 °C

Electronic Component
• PLC: TRIO (Germany)
• Servo Motor: Huichuan
• Servo Driver: Huichuan
• Low Voltage Electrical Apparatus: EATON (USA)
• Normal Button: EATON (USA)
• Emergency Button: EATON (USA)
• Bearing: NSK (Japan)
• Solenoid Valve: AirTac (Taiwan)
• Air Cylinder: AirTac (Taiwan)
• Photoelectric Eye Color Code Tracking: Sick (Germany)