Laser head broken, laser head integrator Spartanics optics Cambridge Technology; laser type Coherent

Waste suction system to remove parts of kiss cut labels

- Complete frame to receive this option

- Device to remove the labels

- Industrial vacuum section

Independent semi-rotary die cutting station

- Complete frame

- Die cutting station servo motorised with a 20 inches magnetic cylinder

- Registration sensor

- Mechanical pressure bridge with gauge system type KMS 3 or similar

- Waste matrix rewind pneumatical mandrel 76 mm and pressure arm

- Servo compensation trolley

- Touch screen control panel

Gap Master option

- Gap Master system from Kocher and Beck for the gap adjustment in the semi-rotary die station included a KMS set of pressure adjustment gauges .

Buffer unit for inline press connection

This section has been developed to synchronise the speed and automatism of a Digital press or

conventional press type TR2 and the SMAG converting solution type Digital Galaxie generation III, E- Cut . This section offers the advantage to accumulate 12 meters of substrate between two machines, to synchronise the stop/start and any speed variations.

Converting section

- Two nip rollers located before and after the slitting module

- Slitting module with 4 shear knives

- Two rewind shafts equipped with two pneumatical mandrels diam 76 mm

- Programmable reel length or label count as required

- Touch screen operator interface for the programming and presetting system

Turret rewinding Option

Semi-automatic turret rewinder instead of two fixed mandrels as in the standard machine.

TECHNICAL SPECIFICATIONS:

Semi-rotary die cutting section: this station can also work on registered full rotary mode

Cross adjustment: /- 5 mm

Die cutting magnetic cylinder repeat delivered with press: 20 inches

Minimum die cut repeat in semi-rotary mode with 20 cylinder : 100 mm

Maximum die cut repeat in semi-rotary mode with 20 cylinder : 450 mm

Thickness of the magnetic die cutting plate: 0,44 mm

Registration in semi-rotary mode according to the printing spot: /- 0,15 mm

Maximum speed on semi-rotary mode: up to 50 m/min according to the die cutting plate length

Maximum speed on registered full rotary mode: 150 m/minute