The BDM Universal has been designed to offer the shortest set up time and widest size range available making it a perfect machine for short, medium and long run case production of 1 and 3-piece cases, in-line board cutter.
Capacity: up to 60 cases/min
Board thickness: min. 1 mm- max. 4 mm
Spine width min. 6 mm - max. 80 mm
Hinge width: min. 5 mm - max. 15 mm
Thickness of flexible spine: min. 0,3-max. 0,5 mm, depends on width
Thickness of cover material: min 1 mm – max 3mm
Thickness of cover material.: min 0,1 mm, max. 0,3 mm
Compressed air requirements: approx. 1,200 Nl/min at 6 bar
Electrical connection results: 400V, 3PNE, 50Hz, 25 KW
Fully automatic computer aided make-ready
Board feeder including guides for flexible spine unit
Flexible Spine attachment 6mm
Non-stop feeder for cover material
Lowerable glue unit
Cold glue pot and hose pump for inside lining
Gluing and pressing station
Transport system with swinging arm and suction device
Side folding station
2nd pressing station and delivery
Counter stacker with return transport to the operator
Glue viscosity control
Counter Stacker delivery with return belt
3 piece case with rigid spine from magazine
Quarter bound facility
Equipment for single-piece board
Support bars for the processing of one-piece covers