2004
74 x 105 cm
Punch and stamp system
maximum punching force 2.6 MN (260 t)
system with high-performance sheet feeder W4
fully automatic punching, creasing and stamping
with or without a gripper edge
for breaking out the inner waste as well as the lateral
and rear edges of the sheet
for stacking the punched and broken sheets
Stack height feeder including pallet 1,700 mm (at 600 mm increase)
Stack height including pallet 1,600 mm (at 600 mm increase)
with Centerline equipment
Operating platform
professionally cleaned, painted and workshop checked
Available: immediately
Located: Germany