Mitsubishi D32 (2004)
Ref.No: 93819
 
 
Technical Conditions 
   Optical 
 
Heatset machine
Age:
Year 2004
 
Max.Size:
115 x 66 cm (45 x 25 inch)
 
Current State:
In production
 
Colors:
 
Impress.Count:
mio
 
Extras:
 
Dealer Ref.No:
 
 
E-mail for information
Add to Favorites
Share |
 
Description:
 
 
2004 MITSUBISHI D32 WEB PRESS NEW PRESS TO MARKET
4 Mitsubishi Offset Units 578mm cut off
Mitsubishi flying splicer model 40 width 50 diameter rolls
Mitsubishi single pass constant tension infeed
Kawahara reel lifter and track
BST Web guide for lateral web adjustment located at the infeed
Mitsubishi Diamond 32 Printing units, fully shaftless, Semi-Automatic Plate Changers (SAPC), double around plate and blanket, remote inking and continuous dampening
Baldwin Web break/catcher/detector device
Megtec Dual dry TNV single pass gas fired dryer system, approx. 12m in length with incorporated pollution control
Megtec smoke tunnel
Baldwin combination fountain chemistry & vibra zone temperature control
Heuch chiller and circulation
GMI Clarios 7200 closed loop color/register for 4 unit 96.5cm wide
Quad Tec RGS4 colour registration
BST Unframed web guide for lateral web adjustment located at the chillstand
Cutoff control – one full unit
FMC silicone applicator
Folder air cooler
Mitsubishi 6 roll chill roll stand
Mitsubishi Folder superstructure with angle bars prior to folder
Mitsubishi D32 combination with single chopper with automated changeover for production of tabloid, magazine, digest folds
Planatol Optimatic Combie jet-7 Gluer
Plate bender and punch
Products 16pp, SquareTabloid 12pp, Tabloid 4pp half web, Magazine 8pp half web, Digest 2-up 8pp half web, Tabloid 8pp, Magazine 16pp, Digest 2-up 16pp, Flopped head 8pp half web
System runs as follows:
From the press the first option is the folded product can connect to Muller Martini Forte stacker.
From the press the second option is the folded product can pass to the turning station (this section allows the choice of gripping the paper from the end instead of the spine for stitching)
From the press the third option is the folded product can pass to the stitcher/pass through, or log stacker with wrapper/bypass – trimming drum/bypass direct to stacker which then feeds through 2x strappers (cross strapping) back to log stacker or to manual offload belt
Photos and videos available on request.
 
Located:
Australia-Oceania
 
Available:
Immediately
 
Price:
On Request
 
 
Incoterms:
 
 
Click to see list of photos
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top