Inline Foiler for Man-Roland 700 | 2007 Used Machine for sale

 
Image1 Inline Foiler for Man-Roland 700
Image1 14195
Image2 14195
Image3 14195
Image4 14195
Image5 14195
Image6 14195
 
 
Used Printing Machines and Equipment:
Gold-Foiling machine
PD Ref: 14195 | Last updated: 11-10-2013
Viewed: 1026 times

   Video Added

Age: 2007
 
Max.Size: 104 x 72 cm (40 x 28 inch)
 
Current State: In production
 
Colors: 6
 
Impress.Count: No counter
 
Extras:
 
Dealer Ref.No: 455
 
 
 
Contact Dealer Direct
checkMake an Offer
Print this Offer
Not the right Used Printing Machinery? Click here and Start to use Auto-Notify service - newest Used Printing Machinery will be sent via E-mail to you immediately.
 
Technical Description:
 
 
Important: 1 pieces Inline Foiler Prindor for sale
 
 
1 pieces Inline Foiler for sale - mounted on Man-Roland 700. Price EURO 130.000 / price as new was - EURO 600.000/

InlineFoiler Prindor

Inline for More Value The ROLAND InlineFoiler is a fine example of Value Added Printing - uniting the highest brilliance with optimized inline production processes. As opposed to the established hot-foil embossing method no second production step is needed for inline cold foil transfer and the material is not subjected to heat. This is how the highest quality can be combined with economic efficiency.

Two printing units are required: in the first printing unit the areas of the substrate where foil is to be applied are printed with a special adhesive ink via the inking roller system using a conventional offset printing plate. This adhesive ink is coloured so that the amount applied can be objectively measured with the aid of a densitometer.

In the second printing unit above which the foil unwinding station is mounted, the blanket cylinder presses the foil onto the areas of the sheet covered with the adhesive ink. The unused foil remains on the carrier layer which is rewound by the rewinding station above the third printing unit. In this printing unit and subsequent ones the substrate and foil can be printed.

Overprinting enables interesting effects to be achieved through the combination of foil and different coloured inks. This is a unique and patented process. One major advantage of cold foil transfer is the fast changeover between foil transfer and normal printing. Experience shows this only takes around 30 minutes

Inline coating module technology is based on 30 years of experience. Initially the focus was on the protective function of dispersion coating but gloss effects rapidly became very important.

This was followed by gold and silver applications made possible by double coating modules using anilox roller/chambered doctor blade technology. And then the possibilities were expanded even further by the increasing use of UV inks and coatings along with the enormous progress made in application technologies and materials.

The best configuration for inline cold foil transfer is the ROLAND 700 with six printing units and a coating module. This permits cold foil transfer plus four-color printing and coating, or the press can be used for normal six-colour printing with inline coating.
 
Located:
Europe Eastern
 
Current State:
In production
 
Available:
Immediately
 
Price:
Registerregtosee
 
 
Incoterms:
 
Contact Dealer Direct
 
 
How it Works? - About Pressdepo.com
Ads
 
GAB Supplies UK
 
Images
See photos of This Used Printing Machinery
Picture1 Inline Foiler for Man-Roland 700
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
Go to Top
 
 
Subscribe for latest equipment
advert bottom
why_this_website
 
We use cookies to help provide you with the best possible online experience. By using this site, you agree that we may store and access cookies on your device.